SondaSys LA300

Sonda SYS. LA300

Stereolithography is one of the additive manufacturing technologies, consisting in hardening of specialized resins using a UV laser beam. The laser dot harden the outside edges of the detail and then fill them, creating a spatial model layer by layer in this way. A characteristic feature of the parts made in this technology are extremely smooth surfaces of models. 3D resin printers also allow you to make details with high precision of small details (precision reaches up to 0.05 mm).

Technical specification:

Building chamberDimensions300 x 300 x 200 mm (standard)
  300 x 300 x 300 mm (custom)
 Resin heating systemHot air
 Available materialsZR680, ZR710, ZR820, RealABS, RedWood
 Operating systemWindows 10
Physical propertiesDimensions1200 x 900 x 1700 mm
 Weight~630 kg
 Working temperature20-26 ºC
 Power supply200~240 VAC,
  50/60 Hz
  1 phase, 5/10 A
OpticsLaser type:Nd:YVO4
 Laser beam diameter (1/e2)0.1~0.16 (standard), 0.1~0.5 (extra)
 Wavelenght354,7 nm
 Power1000 mW/3000 mW
 Detail scanning speed6.0 m/s
 Scanning speed10.0 m/s
 Model building speed30~80 g/h
TolerancesPositioning repeatability+/- 0,01 mm
 Layer thicknessStandard: 0,1 mm
  Fast: 0,1-0,15 mm
  Precise: 0,05-0,1 mm
OtherConnectionEthernet, TCP/IP, IEEE802.3
 SoftwareSondasys SLA300
 File formatCLI, SLC, STL
WarrantyLaser12 months or 5000 working hours
 Machine12 months